RX400h · Service Manual BRAKE

REMOVAL

Removal / installation


1. REMOVE FRONT WHEEL

2. DRAIN BRAKE FLUID

3. REMOVE FRONT FLEXIBLE HOSE

  1. Remove the clip.

  1. Remove the brake tube with SST while holding the front brake flexible hose with a wrench.

    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake tube.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.

  1. Remove the bolt, and separate the front brake flexible hose and the speed sensor from the shock absorber.

  1. C108419
    Remove the union bolt, the front brake flexible hose and gasket.

← COMPONENTSINSTALLATION →