RX400h · Service Manual BRAKE

REMOVAL

Removal / installation


1. DRAIN BRAKE FLUID

2. REMOVE REAR WHEEL

3. REMOVE REAR BRAKE FLEXIBLE HOSE

  1. C108420
    Remove the union bolt, the rear brake flexible hose and gasket.

  1. C108422
    Remove the bolt, and separate the rear brake flexible hose.

  1. Remove the clip.

  1. Remove the brake tube with SST while holding the rear brake flexible hose with a wrench.

    SST
    09023-00101  

    NOTICE:
    1. Do not bend or damage the brake tube.
    2. Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.

← COMPONENTSINSTALLATION →