INSTALLATION
Removal / installation
| 1. INSTALL CIRCUIT BREAKER SENSOR NO.1 |
Install the circuit breaker sensor No.1 with the 2 bolts to the w/ converter inverter assembly.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 70 in.*lbf }
Connect the connector to the circuit breaker sensor No.1.
| 2. INSTALL AIR CLEANER CAP W/INLET |
Install the air cleaner filter element to the air cleaner case.
Install the 2 bolts, 4 clamps and air cleaner cap w/ inlet.
- Torque:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf }
| 3. INSTALL ENGINE ROOM SIDE LH COVER |
Fit the clips and install the engine room side LH cover.
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. PERFORM INITIALIZATION |