HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting
The intelligent tester can be used in steps 2, 3, 5, 7, 9 and 10.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CHECK MULTIPLEX COMMUNICATION SYSTEM |
Check for DTC output.
|
||||
|
| 3.CHECK CAN COMMUNICATION SYSTEM |
Check for DTC output.
|
||||
|
| 4.WARNING LIGHT CHECK |
| |||||
| 5.CHECK DTC (Present and Past DTCs) |
|
||||
|
| 6.DTC CHART |
| |||||
| 7.CIRCUIT INSPECTION |
| |||||
| 8.REPAIR |
| |||||
| 9.CLEAR DTC (Present and Past DTCs) |
| |||||
| 10.CHECK DTC (Present and Past DTCs) |
|
||||
|
| 11.CONFIRMATION TEST |
| |||||