ON-VEHICLE INSPECTION
Inspection
- NOTICE:
- Check that no DTCs are present in the ABS and VSC motor relay.
- If any one of the DTCs (C0273/13, C0274/14, C1361/91) is detected, inspect the ABS and VSC motor relay in accordance with the troubleshooting of the brake ABS and VSC.
| INSPECT COOLING FAN OPERATION WHEN COOLANT TEMPERATURE IS BELOW 95°C (203°F) |
Check that the cooling fan does not operate when turning the ignition switch ON with the A/C switch OFF.
Check that the cooling fan operates when turning the ignition switch ON with the engine coolant temperature sensor connector disconnected.
| INSPECT COOLING FAN OPERATION WHEN COOLANT TEMPERATURE IS ABOVE 97°C (207°F) |
Warm up the engine and turn the A/C switch OFF.
Check that the cooling fan operates when the coolant temperature is above 97°C (207°F).
Check that the cooling fan stops when the coolant temperature is below 95°C (203°F).