DATA LIST / ACTIVE TEST
System information
| DATA LIST |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position and turn the intelligent tester on.
Select "Tilt & Telescopic".
Touch the "Data List" button.
Select the following items.
Tilt & Telescopic: Item
Measurement Item/ Range (Display)
Normal Condition
Diagnostic Note
T&T Auto Away Function
Auto away and return function/ON or OFF
ON: Auto away and return function is allowed
OFF: Auto away and return function is restrained
-
Tilt Position
Current tilt position data/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Position
Current telescopic position data/ min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Tilt Return Position
Memorized tilt return position data/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Return Position
Memorized telescopic return position data/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
T&T Mem 1
Tilt & telescopic memory position 1/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Tilt Memory Pos 1
Tilt data of memory position 1/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Memory Pos 1
Telescopic data of memory position 1/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
T&T Mem 2
Tilt & telescopic memory position 2/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Tilt Memory Pos 2
Tilt data of memory position 2/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Memory Pos 2
Telescopic data of memory position 2/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
T&T Mem 3
Tilt & telescopic memory position 3/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Tilt Memory Pos 3
Tilt data of memory position 3/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Memory Pos 3
Telescopic data of memory position 3/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Tilt Up Limit
Uppermost tilt position/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Tilt Up Limit Position
Uppermost tilt position data/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Tilt Down Limit
Lowermost tilt position/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Tilt Down Limit Position
Lowermost tilt position data/min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Short Limit
Shortest telescopic position/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Telesco Short Limit Pos
Shortest telescopic position data/ min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Telesco Long Limit
Longest telescopic position/NOT MEM or MEM
NOT MEM: Position is not memorized
MEM: Position is memorized
-
Telesco Long Limit Pos
Longest telescopic position data/ min.: 0000 H (0 edge), max.: FFFF H (65535 edge)
7000 to 9000 H
(28672 to 36864 edge)
-
Up Switch
Communication state of tilt up input by manual switch/ON or OFF
ON: Tilt up is activated by manual switch
OFF: Tilt up is not activated by manual switch
-
Down Switch
Communication state of tilt down input by manual switch/ON or OFF
ON: Tilt down is activated by manual switch
OFF: Tilt down is not activated by manual switch
-
Telesco Short Switch
Communication state of telescopic short input by manual switch/ON or OFF
ON: Telescopic short is activated by manual switch
OFF: Telescopic short is not activated by manual switch
-
Telesco Long Switch
Communication state of telescopic long input by manual switch/ON or OFF
ON: Telescopic long is activated by manual switch
OFF: Telescopic long is not activated by manual switch
-
T&T Manual Switch Data
Voltage data of manual switch/ min.: 0 V, max.: 5 V
Neutral position: Below 0.2 V
Tilt up: 1.67 to 2.13 V
Tilt down: 0.54 to 0.74 V
Telescopic contract: 1.08 to 1.40 V
Telescopic extend: 2.22 to 2.77 V
-
Power Source Voltage
Voltage data of power supply/min.: 0 V, max.: 20 V
Actual power supply voltage
10 to 14 V
-
Freeze Speed Info
Vehicle speed data/0 km/h (0 mph), max.: 255 km/h (158 mph)
Available only for vehicles with the freeze frame data
-
IG Switch (MPX)
Communication state of ignition switch/ON or OFF
ON: Communication is normal
OFF: Communication is interrupted
-
IG Switch
Input state of ignition switch/ON or OFF
ON: Input signal is normal
OFF: Input signal is interrupted
-
Key Switch (MPX)
Communication state of unlock warning switch/ON or OFF
ON: Communication is normal
OFF: Communication is interrupted
-
Receive from Body
Communication state of body ECU signal/OK or Interruption
OK: Communication is normal Interruption: Communication is interrupted
-
Receive from Seat ECU
Communication state of seat ECU signal/OK or Interruption
OK: Communication is normal Interruption: Communication is interrupted
-
Receive from Combi
Communication state of combination switch ECU signal/OK or Interruption
OK: Communication is normal Interruption: Communication is interrupted
-
Receive from Meter
Communication state of combination meter signal/OK or Interruption
OK: Communication is normal Interruption: Communication is interrupted
-
The Number of DTCs
Number of diagnosis codes/min.: 0, max.: 255
Actual number of diagnosis code
-
| ACTIVE TEST |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position and turn the intelligent tester on.
Select "Tilt & Telescopic".
Touch the "Active Test" button.
Select the following items :
Item
Vehicle Condition/Test Details
Diagnostic Note
Tilt Operation
Tilt operation/UP or DOWN
-
Telesco Operation
Telescopic operation/LONG or SHORT
-