CUSTOMIZE PARAMETERS
Troubleshooting
- HINT:
- The following items can be customized.
- NOTICE:
- After confirming whether the items of the customer's request are applicable or not for the customized items, perform the customize operation.
- Be sure to record the current value before customizing.
- In case of performing the troubleshooting, pay attention as there is a possibility that the function is set to OFF by customizing. (Example: In case of the symptom in which "The wireless operation does not function" is displayed, check that the wireless operation is not set to OFF by customizing, then perform the troubleshooting.)
- After confirming whether the items of the customer's request are applicable or not for the customized items, perform the customize operation.
| DISPLAY (ITEM) |
DEFAULT |
CONTENTS |
SETTING |
| Shift Set Temperature (Set Temp Shift) |
NORMAL |
To control with the shifted temperature against the display temperature. |
+2C / +1C / NORMAL / -1C / -2C |
| Air Inlet Mode (Air Inlet Mode) |
AUTO |
In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode. |
MANUAL / AUTO |
| Compressor Mode (Compressor Mode) |
AUTO |
Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF. |
MANUAL / AUTO |
| Compressor / DEF Mode (Comprs / DEF oper) |
LINK |
Function to turn the A/C ON automatically linking with the FRONT DEF button when the A/C is OFF. |
NORMAL / LINK |
| Foot / DEF Auto Mode (Foot/DEF Mode) |
ON |
Function to turn the air flow from FOOT/DEF to ON automatically when AUTO MODE is ON. |
OFF / ON |
| Foot / DEF Auto Blow Up (Auto Blow Up) |
ON |
Function to switch the blower level automatically when the defroster is ON. |
OFF / ON |
| Ambient Temperature Shift (Ambient Tmp Sft) |
NORMAL |
To control with the shifted ambient temperature against the display ambient temperature. |
+3C / +2C / +1C / NORMAL / -1C / -2C / -3C |