RX400h · Service Manual BODY

INSPECTION

Inspection


INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY

  1. B068209E01
    Inspect the LH side lumbar support adjuster motor.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminal.

      OK:
      Measurement Condition
      		 Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      		 Clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      		 Counterclockwise

      If the result is not as specified, replace the lumbar support adjuster assembly.

  1. B068209E01
    Inspect the RH side lumbar support adjuster motor.

    1. Check if the lumbar support adjuster moves smoothly when the battery is connected to the lumbar support adjuster motor connector terminal.

      OK:
      Measurement Condition
      		 Operational Direction
      Battery positive (+) → 1
      Battery negative (-) → 2
      		 Clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      		 Counterclockwise

      If the result is not as specified, replace the lumbar support adjuster assembly.

← INSPECTIONINSPECTION →