RX400h · Service Manual BODY ELECTRICAL

REPAIR

Removal / installation


1. INSTALL HEADLIGHT PROTECTOR RETAINER UPPER

HINT:
  1. If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
  2. Ensure that the headlight assembly is not damaged.

  1. E068365
    Cut off the part shaded in the illustration and sand smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the headlight protector retainer upper against the bosses and gradually file away until installation is possible.

  1. E069115
    Install the headlight protector retainer upper with the 2 screws.


2. INSTALL HEADLIGHT PLATE

HINT:
  1. If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
  2. Ensure that the headlight assembly is not damaged.

  1. E068366
    Cut off the part shaded in the illustration and sand smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the headlight plate against the bosses and gradually file away until installation is possible.

  1. E069112
    Install the headlight plate with the screw.


3. INSTALL HEADLIGHT PROTECTOR RETAINER LOWER

HINT:
  1. If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
  2. Ensure that the headlight assembly is not damaged.

  1. E068364
    Cut off the part shaded in the illustration and sand smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the headlight protector retainer lower against the bosses and gradually file away until installation is possible.

  1. E069113
    Install the headlight protector retainer lower with the screw.


4. INSTALL HEADLIGHT BRACKET LOWER

HINT:
  1. If the installation area of the headlight assembly is damaged, use the supply bracket for low-cost repair.
  2. Ensure that the headlight assembly is not damaged.

  1. E069110
    Cut off the part shaded in the illustration and sand smooth with sandpaper.

    NOTICE:
    After cutting off the part, place the headlight bracket lower against the bosses and gradually file away until installation is possible.

  1. E069114
    Install the headlight bracket lower with the 2 screws.

← INSTALLATIONCOMPONENTS →