RX400h · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation


1. REMOVE REAR COMBINATION LIGHT BULB

  1. E108653
    Turn in the direction indicated by the arrow and separate the rear combination light bulb and the rear combination light socket and wire sub-assembly as a unit.

  1. Remove the rear combination light bulb from the rear combination light socket and wire sub-assembly.


2. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

  1. E108655
    Disconnect the connector and remove the rear combination light socket and wire sub-assembly.

← REMOVALREASSEMBLY →