RX400h · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door)

  1. B109547E01
    Disengage the 2 claws and the 7 clips, and remove the back window panel trim upper.


2. REMOVE BACK DOOR TRIM BOARD (w/ Power Back Door)

  1. B109546E02
    Disengage the 3 claws and remove the back door trim board.


3. REMOVE BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door)

  1. B109549E03
    Disengage the 2 claws and the 7 clips, and remove the back window panel trim upper.


4. REMOVE REAR SPOILER

  1. B110039
    Disconnect the center stop light connector.

  1. Remove the 2 grommets and 5 bolts.

  1. B067937E01
    Remove the 3 clips and rear spoiler sub-assembly.


5. REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY

  1. I037769E01
    Install the strap to the connector of the high mounted stop light assembly.

  1. Remove the 2 screws.

  1. Pass the connector through the inside of the rear spoiler and remove the high mounted stop light assembly.

    HINT:
    Leave the strap inside the rear spoiler.

← COMPONENTSINSTALLATION →