RX400h · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE DECK FLOOR BOX REAR

  1. B110023
    Using a clip remover, remove the 2 clips and deck floor box rear.


2. REMOVE REAR FLOOR FINISH PLATE

  1. B111780
    Using a clip remover, remove the 2 clips.

  1. Disengage the 2 claws and 6 clips, and remove the rear floor finish plate.


3. REMOVE REAR BUMPER STOPPER UPPER

  1. B109338
    Remove the 2 screws.

  1. Using a screwdriver, remove the rear bumper stopper upper.


4. REMOVE REAR BUMPER ASSEMBLY

  1. B109327E01
    Put protective tape under the quarter panel.

  1. Remove the 2 clips and 4 nuts.

  1. Remove the 8 screws.

  1. Release the 10 claws and the rear bumper assembly.

  1. Disconnect the rear reflector connectors.


5. REMOVE REAR FOG LIGHT ASSEMBLY

  1. E068326E01
    Remove the screw.

  1. Disengage the claw and remove the rear fog light assembly.

← COMPONENTSDISASSEMBLY →