RX400h · Service Manual BODY

DTC CHECK / CLEAR

Troubleshooting


CHECK DTC

  1. E109251E01
    Connect the intelligent tester with CAN VIM to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Read the DTC by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC

  1. Connect the intelligent tester with CAN VIM to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Erase the DTC by following the directions on the tester screen.

HINT:
Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEMDATA LIST / ACTIVE TEST →