INSTALLATION
Removal / installation
| 1. INSTALL HEADLIGHT LEVELING ECU (for RHD) |
Install the headlight leveling ECU with the bolt and the nut.
- Torque:
- bolt:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf }
- Torque:
- nut:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf }
Connect the connector.
| 2. INSTALL HEADLIGHT LEVELING ECU (for LHD) |
Install the headlight leveling ECU with the nut.
- Torque:
- 7.0 N*m{ 71 kgf*cm , 62 in.*lbf }
Connect the connector.
| 3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD) |
Connect the connectors.
Install the 2 bolts <A>, the 2 screws <C>, and the glove compartment door assembly.
| 4. INSTALL INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY (for RHD) |
Connect the connectors.
Engage the 3 claws and install the instrument panel No.2 under cover sub-assembly.
| 5. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (for LHD) |
Connect the connectors.
Engage the 5 claws and the 4 clips.
Connect the hood lock control cable assembly.
Install the bolt <A>, the screw <C>, and the instrument panel finish panel sub-assembly lower.
| 6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH |
Install the 2 clips and the cowl side trim sub-assembly LH.
| 7. INSTALL FRONT DOOR SCUFF PLATE LH |
Connect the connector. (w/ illumination scuff plate)
Engage the 6 claws and 4 clips, and install the front door scuff plate.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 9. PERFORM INITIALIZATION |