RX400h · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL WIPER SWITCH

  1. Install the wiper switch with the claw.

  1. Connect the connector.


2. INSTALL STEERING COLUMN COVER (for Power Tilt and Power Telescopic)

  1. C111431
    Engage the claw to install the steering column cover upper.

  1. C111471
    Engage the 2 claws to install the steering column cover lower.

    NOTICE:
    Do not damage the tilt and telescopic switch.

  1. Install the 3 screws.


3. INSTALL STEERING COLUMN COVER (for Manual Tilt)

  1. C111431
    Engage the claw to install the steering column cover upper.

  1. C111428E01
    Engage the 2 claws to install the steering column cover lower.

  1. Install the 3 screws.

  1. Install the steering column cover No.2.

← INSPECTIONON-VEHICLE INSPECTION →