RX400h · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation


1. REMOVE FRONT BUMPER STAY CENTER

  1. B115757
    Remove the 5 clips and front bumper stay center.


2. REMOVE FRONT BUMPER ASSEMBLY

  1. B110043
    Using a hexagon 4 mm wrench, remove the hexagon screw.

  1. B115758E01
    Put protective tape under the front fender.

  1. Remove the 6 screws and 2 bolts.

  1. Release the 6 claws and front bumper assembly.

  1. w/ headlight washer:

    1. Remove the washer hose clip.

  1. Disconnect the fog light connectors.


3. REMOVE HEADLIGHT CLEANER WASHER NOZZLE

  1. I033686E01
    Extend the headlight cleaner washer nozzle.

  1. Disengage the 2 claws and remove the headlight cleaner washer nozzle.


4. REMOVE HEADLIGHT WASHER ACTUATOR

  1. E110458E01
    Disconnect the headlight washer hose.

  1. Remove the 2 bolts.

  1. Disengage the 2 claws and remove the headlight washer actuator.

← COMPONENTSINSTALLATION →