DATA LIST / ACTIVE TEST
System information
| USING INTELLIGENT TESTER |
  |
Connect the intelligent tester to the DLC3.
Monitor the ECU data by following the prompts on the tester screen.
- HINT:
- The intelligent tester has a "Snapshot" function which records the monitored data. Refer to the intelligent tester operator's manual for further details.
| DATA LIST |
- HINT:
- Using the DATA LIST displayed on the intelligent tester, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to shorten the labor time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Read the DATA LIST according to the display on the tester.
Item
Test Details
Diagnostic Note
Mirror Selection SW (R)
Mirror selection switch signal for RH mirror/ON or OFF
ON: Switch is in Right position
OFF: Switch is in neutral or Left position
Mirror Selection SW (L)
Mirror selection switch signal for LH mirror/ON or OFF
ON: Switch is in Left position
OFF: Switch is in neutral or Right position
Mirror Position SW (R)
Mirror position switch signal (Right)/ON or OFF
ON: Switch R is ON
OFF: Any switch except R is ON or all switches are OFF
Mirror Position SW (L)
Mirror position switch signal (Left)/ON or OFF
ON: Switch L is ON
OFF: Any switch except L is ON or all switches are OFF
Mirror Position SW (Up)
Mirror position switch signal (Up)/ON or OFF
ON: Switch UP is ON
OFF: Any switch except UP is ON or all switches are OFF
Mirror Position SW (Dwn)
Mirror position switch signal (Down)/ON or OFF
ON: Switch DOWN is ON
OFF: Any switch except DOWN is ON or all switches are OFF
Outer Mirror Fold SW
Retract switch position signal/ON or OFF
ON: Retracted position
OFF: Driving position