DATA LIST / ACTIVE TEST
System information
| READ DATA LIST |
- HINT:
- Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON.
Read the DATA LIST.
Body ECU: Item
Measurement Item /
Display (Range)
Normal Condition
Diagnostic Note
Key Unlock Warning SW
Unlock warning switch signal
/ON or OFF
ON: Key is in ignition key cylinder
OFF: No key is in ignition key cylinder
-
D Door Courtesy SW
Driver side door courtesy switch signal
/ON or OFF
ON: Driver side door is open
OFF: Driver side door is closed
-
| PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
Connect the intelligent tester with CAN VIM to the DLC3.
Turn the ignition switch ON.
Perform the ACTIVE TEST.
METER: Item
Test Details
Diagnostic Note
Key Remained Buzzer
Key reminder buzzer (OFF/ON)
Confirm that the vehicle is stopped, engine idling