RX400h · Service Manual SECURITIES

DTC CHECK / CLEAR

Troubleshooting


CHECK DTC

  1. Connect the intelligent tester to the DLC3.
    B111607E01

  2. Turn the ignition switch on.

  3. Read the DTCs by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR THE DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on.

  3. Erase the DTCs by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEMDATA LIST / ACTIVE TEST →