RX400h · Service Manual ENGINE

REMOVAL

Removal / installation


1. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)

  1. A109930
    Disconnect the air fuel ratio sensor connector and clamp.

  1. A109932E01
    Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.
    SST
    09224-00010  

    NOTICE:
    Do not to damage the air fuel ratio sensor.


2. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)

  1. Disconnect the air fuel ratio sensor connector and clamp.

  1. A108672E01
    Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly No.2.
    SST
    09224-00010  

    NOTICE:
    Do not to damage the air fuel ratio sensor.

← COMPONENTSINSPECTION →