RX400h · Service Manual BODY

INSTALLATION

Removal / installation


1. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY

  1. I037769
    Install the strap to the connector of the high mounted stop light assembly.

    HINT:
    Leave the strap inside the rear spoiler.

  1. Pass the connector through the inside of the rear spoiler and install the high mounted stop light assembly with the 2 screws.


2. INSTALL REAR SPOILER SUB-ASSEMBLY

  1. B110039
    Install the rear spoiler sub-assembly with the 3 clips.

  1. Install the 5 bolts and 2 grommets.

    Torque:
    9.8 N*m{ 100 kgf*cm , 87 in.*lbf }

  1. B067937E01
    Connect the center stop light connector.


3. INSTALL BACK WINDOW PANEL TRIM UPPER (w/ Power Back Door)

4. INSTALL BACK DOOR TRIM BOARD (w/ Power Back Door)

5. INSTALL BACK WINDOW PANEL TRIM UPPER (w/o Power Back Door)
← REMOVALCOMPONENTS →