RX400h · Service Manual BODY

REMOVAL

Removal / installation


1. REMOVE ROCKER PANEL MOULDING PROTECTOR NO.6

  1. B068612
    Remove the 4 screws and rocker panel moulding protector.


2. REMOVE ROCKER PANEL MOULDING

  1. B069228E01
    Using a screwdriver, remove the 7 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the 2 screws.

  1. Using a hexagon wrench, remove the 2 screws.

  1. Disengage the 2 clips and remove the rocker panel moulding.

← COMPONENTSINSTALLATION →