RX400h · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation


1. INSTALL NO.2 DISC PLAYER BRACKET

  1. E068296
    Install the No.2 disc player bracket with the 2 screws.


2. INSTALL DISC PLAYER BRACKET

  1. E068295
    Install the disc player bracket with the screw.


3. INSTALL NAVIGATION ECU

  1. E111293E01
    Install the navigation ECU with the 3 bolts.

  1. Connect the 3 connectors and engage the clamp.


4. INSTALL DECK SIDE TRIM BOX LH

  1. B111781
    Install the deck side trim box with the 2 clips.


5. INSTALL DECK SIDE TRIM BOX RH

6. INSTALL JACK CARRIER ASSEMBLY

  1. Install the jack carrier assembly, jack assembly and jack carrier support.


7. INSTALL REAR FLOOR FINISH PLATE

  1. B110477
    Engage the 2 claws and 6 clips, and install the rear floor finish plate.

  1. Install the 2 clips.


8. INSTALL NO.3 DECK BOARD SUB-ASSEMBLY

  1. B110025
    Install the deck No.3 board sub-assembly with the 2 bolts and 2 nuts.


9. INSTALL NO.2 DECK BOARD SUB-ASSEMBLY

  1. B110024
    Install the deck No.2 board sub-assembly with the 4 bolts and 2 nuts.


10. INSTALL DECK FLOOR BOX REAR

  1. B110023
    Install the deck floor box rear with the 2 clips.


11. INSTALL DECK FLOOR BOX FRONT

  1. B110022
    Install the deck floor box front with the 2 clips.


12. INSTALL DECK BOARD SUB-ASSEMBLY

  1. B110455
    Install the deck board sub-assembly with the 2 bolt.

  1. Engage the 5 clips.


13. INSTALL TONNEAU COVER ASSEMBLY

14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

15. PERFORM INITIALIZATION

NOTICE:
Some systems need initialization when disconnecting the cable from the negative battery terminal. (Click here)

← REMOVALPRECAUTION →