RX400h · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection


INSPECT REAR COMBINATION LIGHT ASSEMBLY

  1. E069342
    Measure the voltage according to the value(s) in the table below.

    Voltage:
    Tester connection
    		 Condition
    		 Specified condition
    1 - 2
    		 Brake pedal released
    		 Below 1 V
    1 - 2
    		 Brake pedal depressed
    		 10 to 14 V

  1. Disconnect the rear combination light assembly connector.

  1. Measure the resistance of the rear combination light according to the value(s) in the table below.

    Resistance:
    Tester connection
    		 Condition
    		 Specified condition
    1 - 2
    		 Always
    		 317 to 347 Ω

    If the result is not as specified, replace the light.

← COMPONENTSREMOVAL →