RX400h · Service Manual BODY

INSTALLATION

Removal / installation


1. INSTALL REAR CONSOLE BOX

  1. B108546E02
    Connect each of the clamp and the connector.

  1. F045693
    Keeping the rear console box pulled in the rear direction of the vehicle, install the 6 bolts from the left and right sides.

  1. B108545E02
    Connect the console box lock control cable assembly and install the rear console box.


2. INSTALL CONSOLE BOX HOLE COVER

  1. B112173
    Slide the front seat assemblies RH and LH forward.

  1. Slide the rear console box fully to the back end and install the console box hole cover.


3. INSTALL CONSOLE BOX NO.2 HOLE COVER

HINT:
Use the same procedures for the console box No.2 hole cover and the console box hole cover.

← REASSEMBLYPRECAUTION →