DATA LIST / ACTIVE TEST
System information
| READ DATA LIST |
- HINT:
- Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
Connect the intelligent tester with CAN VIM to the DLC3.
Turn the ignition switch to the ON position.
Read the DATA LIST.
Body ECU Item
Measurement Item /
Display (Range)
Normal Condition
Diagnostic Note
Back Door Open SW
Back door opener switch signal (Outside handle switch)
/ON or OFF
ON: Back door opener switch is pushed
OFF: Back door opener switch is not pushed
-
Power back door ECU Item
Measurement Item /
Display (Range)
Normal Condition
Diagnostic Note
Back Door Handle SW
Back door opener switch signal (Outside handle switch)
/ON or OFF
ON: Back door opener switch is pushed
OFF: Back door opener switch is not pushed
-
| PERFORM ACTIVE TEST |
- HINT:
- Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.
Connect the intelligent tester with CAN VIM to the DLC3.
Turn the ignition switch to the ON position.
Perform the ACTIVE TEST.
Body ECU Item
Test Details
Diagnostic Note
Trunk and Back-Door Open
Operate back door open
OFF/ON
-
Power back door ECU Item
Test Details
Diagnostic Note
Latch Release
Back door lock latch is released
OFF/ON
-