CUSTOMIZE PARAMETERS
Troubleshooting
- HINT:
- The following items can be customized.
- NOTICE:
- After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
- Be sure to record the current settings before customizing.
- When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization.
- After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
| DISPLAY (ITEM) |
DEFAULT |
CONTENTS |
SETTING |
| PBD SW Operation |
0.8s |
Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec. |
0.8s/ON |
| PBD Buzzer Volume |
LARGE |
Function that adjusts the volume of warning buzzer that notifies power back door is operating |
OFF/SMALL/LARGE |
| Wireless PBD Operation |
0.8s |
Function that operates power back door when transmitter switch is pressed in specified way (1-press, 2-presses, 0.8 sec.-press or OFF*1) |
ON/TWICE ON/0.8s/OFF |
| PBD Assist Open*2 |
OFF |
Function that helps power back door opening operation |
ON/OFF |
- HINT:
- *1: Wireless (transmitter switch) operation of the power back door is disabled.
- *2: When this item is set to ON:
When the back door is fully closed, pulling the back door opener switch (outside handle switch) activates the power back door system to automatically open the back door after it is unlatched.
- *1: Wireless (transmitter switch) operation of the power back door is disabled.