RX400h · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection


INSPECT FOG LIGHT RELAY

  1. B016200
    Remove the fog light relay

  1. Measure the resistance according to the value(s) in the table below.

    Resistance:
    Tester Connection
    		 Switch position
    		 Specified condition
    3 - 5
    		 Always
    		 10 kΩ or higher
    3 - 5
    		 When battery voltage is applied to terminal 1-2
    		 Below 1 Ω

    If the result is not as specified, replace the fog light relay.

← ON-VEHICLE INSPECTIONPRECAUTION →