01-E0
Diagnostic trouble codes
DESCRIPTION
| DTC No. |
DTC Detection Condition |
Trouble Areas |
| 01-E0 |
"Registration complete" signal from the master device cannot be received. |
- |
| 01-E3 |
The registration demand signal from the slave device is output. Or the registration demand signal is output by receiving connection confirmation signal from the sub-master device |
- |
| 01-E4 |
The multiple frame transmission is incomplete |
- |
- HINT:
- Even if no failure is detected, a trouble code may be recorded depending on the battery condition or engine start voltage.
INSPECTION PROCEDURE
- HINT:
- After the inspection is completed, clear the DTCs.