SERVICE DATA
Specifications
| Front wheel alignment |
Vehicle height |
|
| Front: A-B |
110.6 mm (4.35 in.) |
|
| Rear: C-D |
21.1 mm (0.83 in.) |
|
| Front wheel alignment |
Toe-in (total) Rack end length difference |
0 +- 2mm 1.5 mm (0.059 in.) |
| Wheel angle |
||
| Inside wheel Out side wheel: Reference |
35°38' +- 2° (35.63° +- 2°) 31°20' (31.33°) |
|
| Camber |
-0°40' +- 45' (-0.67° +- 0.75°) |
|
| Right-left difference |
45' (0.75°) or less |
|
| Caster |
2°25' +- 45' (2.42° +- 0.75°) |
|
| Right-left difference |
45' (0.75°) or less |
|
| Steering axis inclination |
10°40' +- 45' (10.67° +- 0.75°) |
|
| Right-left difference |
45' (0.75°) or less |
|
| Front suspension |
Lower ball joint turning torque |
3.5 N*m (36 kgf*cm, 31 in.*lbf) or less |
| Stabilizer link ball joint turning torque |
2.0 N*m (20 kgf*cm, 18 in.*lbf) or less |
- A:
- Ground clearance of front wheel center
- B:
- Ground clearance of lower suspension arm No.2 bush set bolt center
- C:
- Ground clearance of rear wheel center
- D:
- Ground clearance of strut rod set bolt center
| Rear wheel alignment |
Toe-in (total) |
3 +- 2 mm (0.12 +- 0.08 in.) |
| Camber |
-0°35' +- 45' (-0.58° +- 0.75°) |
|
| Right-left difference |
45' (0.75°) or less |
|
| Rear suspension |
Stabilizer link ball joint turning torque |
1.0 N*m (10 kgf*cm, 8.9 in.*lbf) or less |