TORQUE SPECIFICATIONS
Specifications
| Part Tightened |
N*m |
kgf*cm |
ft.*lbf |
| Hybrid transaxle x Pump cover plug |
8.0 |
82 |
71 in.*lbf |
| Park neutral position switch x Hybrid transaxle |
13 |
133 |
10 |
| Floor shift assembly x Vehicle |
12 |
122 |
9 |
| Transaxle control cable assembly x Body |
5.5 |
56 |
49 |
| Transaxle control cable end x Control shaft lever |
15 |
150 |
11 |
| Transaxle x Drain plug (Fluid) |
39 |
398 |
29 |
| Transaxle x Filler plug (Fluid) |
39 |
398 |
29 |
| Transaxle x Drain plug (Coolant) |
39 |
398 |
29 |
| Park/neutral position switch x Lock nut |
6.9 |
70 |
61 in.*lbf |
| Park/neutral position switch x Control shaft |
6.9 |
70 |
61 in.*lbf |
| Oil cooler inlet tube x Transaxle |
34 |
350 |
25 |
| Control cable bracket x Support tube bracket |
8.2 |
84 |
73 in.*lbf |
| Oil pump x Body |
7.0 |
71 |
62 in.*lbf |
| Oil No.1 cooler x Air duct |
4.9 |
50 |
43 in.*lbf |
| Oil cooler x Water pump bracket |
4.9 |
50 |
43 in.*lbf |
| Engine x Transaxle (Bolt A) |
64 |
653 |
47 |
| Engine x Transaxle (Bolt B) |
46 |
469 |
34 |
| Engine x Transaxle (Bolt C) |
64 |
653 |
47 |
| Engine x Transaxle (Bolt D) |
37 |
377 |
27 |
| Oil cooler tube clamp x Support tube bracket |
7.0 |
71 |
62 in.*lbf |
| Transaxle x Engine mounting bracket |
64 |
653 |
47 |
| Transaxle x Transmission case cover |
8.4 |
86 |
74 in.*lbf |
| Wire harness bracket x Transaxle |
8.4 |
86 |
74 in.*lbf |
| Transaxle x Ground wire |
8.4 |
86 |
74 in.*lbf |
| Transaxle x Flywheel housing under cover |
7.8 |
80 |
69 in.*lbf |