HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
| |||||
| 3.CONNECT INTELLIGENT TESTER TO DLC3 |
- HINT:
- If the display indicates a communication fault in the tester, inspect the DLC3.
| |||||
| 4.CHECK AND RECORD DTC AND FREEZE FRAME DATA |
- HINT:
- If a DTC related to the CAN communication system malfunction is output, first troubleshoot and repair the CAN communication system. (Click here)
| |||||
| 5.CLEAR DTC |
| |||||
| 6.PROBLEM SYMPTOM CONFIRMATION |
When the malfunction does not occur, go to A.
When the malfunction occurs, go to B.
|
|||||
| |||||
| 7.SYMPTOM SIMULATION |
| |||||
| 8.CHECK DTC |
| |||||
| 9.DTC CHART |
| |||||
| 10.CIRCUIT INSPECTION |
| |||||
| 11.IDENTIFICATION OF PROBLEM |
| |||||
| 12.ADJUSTMENT AND/OR REPAIR |
| |||||
| 13.CONFIRMATION TEST |
| |||||