P0336-137

Diagnostic trouble codes

DESCRIPTION

The crankshaft position sensor sends the engine speed signal (NE) to the engine CPU and HV CPU of the HV control ECU. The HV control ECU compares the input engine speed signals (NE) in the engine CPU and HV CPU. If any abnormality is found, this DTC will be output.

DTCNo.	INF Code	DTC Detection Condition	Trouble Area
P0336	137	Conditions 1 and 2 continue for 1.5 seconds (1 trip detection logic): Engine speed exceeds idling speed Difference between the engine speed calculated by the engine CPU and HV CPU is 300 rpm or more	HV control ECU

WIRING DIAGRAM

INSPECTION PROCEDURE

1. REPLACE HYBRID VEHICLE CONTROL ECU

COMPLETED