P3108-594
Diagnostic trouble codes
DESCRIPTION
Since the A/C amplifier is connected to BEAN, the HV control ECU communicates with the amplifier using CAN via the network gateway ECU.| DTC No. |
INF Code |
DTC Detection Condition |
Trouble Area |
| P3108 |
594 |
CAN communication problem |
CAN communication system |
INSPECTION PROCEDURE
| 1. READ OUTPUT DTC (CAN BUS CHECK) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Select the following menu items: Powertrain / Hybrid Control / DTC.
- HINT:
- If DTCs other than CAN communication problem DTCs are output simultaneously, first solve the CAN communication problem, and then perform troubleshooting for other DTCs.
| NEXT | ||
 |
||
| ||