Fuel Filter

REMOVAL & INSTALLATION

2.3L, 2.5L and 3.0L Engines

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Properly relieve the fuel system pressure.
3. Remove or disconnect the following:
   • Negative battery cable
   • Push connect and R-clip fittings from the fuel filter
   • Fuel filter

   To install:

4. Install or connect the following:
   • Fuel filter. Torque the nut to 17 ft. lbs. (23 Nm).
   • R-clip and push connect fittings
   • Negative battery cable
5. Start the vehicle, check for leaks and repair if necessary.

4.0L Engines

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. Properly relieve the fuel system pressure.
3. Remove or disconnect the following:
   • Negative battery cable
   • Fuel lines
   • Fuel filter from the support

   To install:

4. Install or connect the following:
   • Fuel filter to the support
   • Fuel lines
   • Negative battery cable
5. Start the vehicle, check for leaks and repair if necessary.