1. Apply the parking brake and fix the front and rear of the wheels with the wheel chocks.
2. Start the engine at idle.
3. Without depressing the clutch pedal, move the
shift lever slowly to the reverse position.
4. Hold the lever when the gear noise is heard.
5. Depress the clutch pedal slowly.
6. Hold the pedal when the gear noise stops (clutch pedal disengagement point).
7. Measure distance A, verify that they are within specification.
1. Disconnect the negative battery cable.
2. Disconnect the clutch pedal position switch connector.
3. Verify that the continuity is as indicated in the table.
