1. Disassemble in the order indicated in the table.
|
1
|
Air mix wire
(See Wire Disassembly Note.)
(See Wire Assembly Note.)
|
|
2
|
Airflow mode wire
(See Wire Disassembly Note.)
(See Wire Assembly Note.)
|
|
3
|
Illumination bulb
|
|
4
|
Knob
|
|
5
|
Fan switch
|
|
6
|
Body
|
2. Assemble in the reverse order of disassembly.
1. Disassemble the wires as shown in the figure.
1. Assemble the wires at the positions shown in the figure.
2. Assemble E-ring with the wire pressed against surface A.
