Hatch/Tailgate/Trunk Lid Lock Cylinder

REMOVAL & INSTALLATION

1. Disconnect the negative battery cable.
2. If necessary, remove any trim in on the underside of the trunk lid, hatch, or tailgate.
3. Release locking tab retaining the lock cylinder to outside handle.
4. Remove the lock cylinder from the trunk lid, hatch, or tailgate.

   To install:

5. Place the lock cylinder into the opening on the trunk lid, hatch, or tailgate.
6. Snap the locking tab into place retaining the lock cylinder to the outside handle.
7. If removed, install any trim in on the underside of the trunk lid, hatch, or tailgate.
8. Connect the negative battery cable.