Outside Air Temperature Sensor

Removal & Installation

To Remove:

1. To remove the radiator grille, remove the 2 retaining screws from the upper surface of the grille. Carefully pull forward on the grille to release the 4 clips on the lower surface.
2. Remove the wiper arm assembly.
3. Remove the front deck garnish on the right-hand side and the left-hand side.
4. Remove the air intake garnish.
5. Remove the outside air temperature sensor.

To Install:

1. Install the outside air temperature sensor.
2. Install the air intake garnish.
3. Install the front deck garnish on the left-hand side and the right-hand side.
4. Install the wiper arm assembly.
5. Install the radiator grille.