2018 / ECLIPSE CROSS / EC - Workshop Manual
00 -GENERAL > 00 -GENERAL > PRECAUTIONS BEFORE SERVICE > MULTI USE TESTER (M.U.T.-III) SUB ASSEMBLY
M.U.T.-III SE
 
 
 
  • caution For the V.C.I.-Lite, use MB992745, MB992747 and MB992748.
  • Refer to the "M.U.T.-IIISE User’s Manual" for instructions on handling the M.U.T.-IIISE.
 
 
 
 
 
cautionTurn the ignition switch to the "LOCK" (OFF) position <except vehicles with Keyless Operation System (KOS)> or put the power supply mode is OFF <vehicles with Keyless Operation System (KOS)> before connecting or disconnecting the M.U.T.-IIISE.
Connect the M.U.T.-IIISE to the diagnosis connector as shown in the illustration.