[ Model - ECLIPSE CROSS / Year - 2018 ]
DRIVE BELT TENSION CHECK AND ADJUSTMENT
2018 / ECLIPSE CROSS / EC - Workshop Manual
11 -ENGINE > 11A-ENGINE MECHANICAL > ON-VEHICLE SERVICE > DRIVE BELT TENSION CHECK AND ADJUSTMENT
 
1.
cautionCheck the drive belt tension after turning the crankshaft clockwise one turn or more.
Make sure that the indicator mark on the drive belt auto-tensioner is within the area marked with A in the illustration.
2. If the mark is out of the area A, replace the drive belt (Refer to ).
noteThe drive belt tension adjustment is not necessary as the drive belt auto-tensioner is adopted.