Mitsubishi Motors Service Manual

FUEL PUMP RELAY CONTINUITY CHECK

2018 / ECLIPSE CROSS / EC - Workshop Manual

13 -FUEL > 13A-DIRECT INJECTION AND MULTIPOINT FUEL INJECTION (DI AND MPI) > ON-VEHICLE SERVICE > FUEL PUMP RELAY CONTINUITY CHECK

Tester connection terminal	Battery voltage	Normal condition
Connector "C" terminal No. 1 - Connector "D" terminal No. 2	No voltage	No continuity
Connector "C" terminal No. 1 - Connector "D" terminal No. 2	Voltage (Connect the positive (+) terminal of battery to terminal No. 2 of connector "A" and the negative (-) terminal of battery to terminal No. 11 of connector "B".)	Continuity (2 Ω or less)