[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
13 -FUEL > 13A-DIRECT INJECTION AND MULTIPOINT FUEL INJECTION (DI AND MPI) > TROUBLESHOOTING > DIAGNOSIS CODE PROCEDURES > CODE NO. P061C TRUSTFUL CHECK ENGINE SPEED
Code No. P061C: Trustful Check Engine Speed
 
 
 
 
FUNCTION
  • Compares the actual engine speed calculated from the crank angle sensor signal cycle with the estimated engine speed calculated from the number of the crank angle sensor signal pulses after a lapse of the specified time.
 
 
TROUBLE JUDGEMENT
Check Condition
  • Engine is running.
Judgement Criterion
  • The difference between the actual engine speed and the estimated engine speed is more than 500 r/min.
 
 
FAIL-SAFE AND BACKUP FUNCTION
  • Throttle opening degree position is in default position.
 
 
PROBABLE CAUSE
  • Failed engine-ECU
 
 
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-IIISE diagnosis code
  • Reconfirmation of diagnosis code.
Is the diagnosis code set?
Replace the engine-ECU.
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).