2018 / ECLIPSE CROSS / EC - Workshop Manual
13 -FUEL > 13B-FUEL SUPPLY > FUEL TANK<4WD><4WD> > FUEL PUMP (MODULE) DISASSEMBLY AND REASSEMBLY
DISASSEMBLY AND REASSEMBLY
 
 
FUEL PUMP AND GAUGE ASSEMBLY
noteFor removal and installation, refer to .
 
Disassembly steps
1.Fuel gauge unit
2.Clip
3.Sub tank assembly
4.Spring
5.Fuel pump wiring harness
6.Fuel filter
7.Fuel pump assembly
>>A<<8.O-ring
9.Spacer
10.Fuel pressure regulator
>>A<<11.O-ring
>>A<<12.O-ring
13.Spacer
>>A<<14.O-ring
15.Bracket
16.Fuel flange and filter assembly
 
 
REASSEMBLY SERVICE POINT
 
 
>>A<< O-RING INSTALLATION
To avoid twisting and damage, apply gasoline before installation of the O-ring.