[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
INSPECTION
2018 / ECLIPSE CROSS / EC - Workshop Manual
14 -ENGINE COOLING > THERMOSTAT > THERMOSTAT INSPECTION
THERMOSTAT CHECK
1.
Immerse the thermostat in water, and heat the water while stirring. Check the thermostat valve opening temperature.
Standard value: 82 ± 1.5°C
2.
Check that the amount of valve lift is at the standard value when the water is at the full-opening temperature.
note
Measure the valve height when the thermostat is fully closed, and use this measurement to compare the valve height when the thermostat is fully open.
Standard value:
Full-opening temperature: 95°C
Amount of valve lift: 8.5 mm or more
