| caution | Use the specified brake fluid. Do not mix brake fluids. |
Specified fluid: Brake fluid DOT 3 or DOT 4
1. Removal the engine room under cover front (Refer to GROUP 51 - Under Cover 
.) 2. Connect a hose with a bottle to the bleeder screw.
3. Open the bleed nipple.
4. Depress the clutch pedal slowly. Open the bleeder screw to let air and brake fluid out. Close the bleeder screw. Release the clutch pedal. Repeat until only brake fluid and no air comes out.
5. Check that the brake fluid reservoir level stays between "MAX" and "MIN" marks throughout the clutch bleeding process.
