2018 / ECLIPSE CROSS / EC - Workshop Manual
22 -MANUAL TRANSMISSION > 22A-MANUAL TRANSMISSION (FF) > ON-VEHICLE SERVICE > TRANSMISSION OIL CHANGE
1. Remove the filler plug and gasket.
2. Remove the drain plug and gasket, and drain the oil.
3. Tighten the drain plug and new gasket, to the specified torque.Tightening torque: 48 ± 20 N·m
4. Fill the specified transmission oil up to the lower edge of the filler plug hole.Specified transmission oil: MITSUBISHI MOTORS GENUINE NEW MULTI GEAR OIL ECO API GL-4 SAE 75W-80Quantity: 2.6 L
5. Tighten the filler plug and new gasket to the specified torque.Tightening torque: 48 ± 20 N·m
