[ Model - ECLIPSE CROSS / Year - 2018 ]
TRANSFER OIL CHANGE <4WD>
2018 / ECLIPSE CROSS / EC - Workshop Manual
23 -AUTOMATIC TRANSMISSION > 23A-CVT > ON-VEHICLE SERVICE > TRANSFER OIL CHANGE<4WD><4WD>
 
 
1. Remove the drain plug and gasket, to drain the transfer oil.
2. Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m
3. Remove the filler plug and gasket, and fill the transfer oil up to the lower edge of the filler plug hole.
  • Transfer oil: MITSUBISHI MOTORS GENUINE Super Hypoid Gear Oil API GL-5 SAE80
  • Filling amount: 0.5 L
4. Install the filler plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m