2018 / ECLIPSE CROSS / EC - Workshop Manual
23 -AUTOMATIC TRANSMISSION > 23A-CVT > TROUBLESHOOTING<CVT><CVT> > FLUID DETERIORATION LEVEL ERASING PROCEDURE
1. Turn the ignition switch to the "LOCK" (OFF) position. Then, connect M.U.T.-IIISE to the diagnosis connector.
2. Turn the ignition switch to the "ON" position.
3. Use the M.U.T.-IIISE special function to execute "CVT oil degradation level (item No.1: Clear CVT oil degradation level)".
4. Turn the ignition switch to the "LOCK" (OFF) position.
