2018 / ECLIPSE CROSS / EC - Workshop Manual
35 -SERVICE BRAKES > 35C-ACTIVE STABILITY CONTROL SYSTEM (ASC) > TROUBLESHOOTING<ASC-ECU><ASC-ECU> > DIAGNOSIS CODE PROCEDURES > CODE NO. C1800 ACC Accele./Decele. monitor
Code No.C1800 Acceleration/Deceleration Monitor
| caution | Before replacing the ECU, ensure that the communication circuit is normal. |
OPERATION
The ASC-ECU receives target acceleration/deceleration signal via CAN bus lines from the ACC-ECU and electric parking brake ECU.
DIAGNOSIS CODE SET CONDITIONS
The ASC-ECU compares an actual acceleration/deceleration signal with the target acceleration/deceleration signal, which is transmitted from the ACC-ECU and electric parking brake ECU. The ASC-ECU will set this diagnosis code when these signals are significantly different.
DIAGNOSIS PROCEDURE
1. Check whether the diagnosis code is set again.
